Products

CO sensors allow you to measure carbon monoxide, which can be a silent killer.

Kimo’s CO 110 measures CO from 0 to 500 ppm.

Kimo’s C 310 is a multifunction sensor with interchangeable probes. It can display and measure four parameters simultaneously.

Kimo’s CPE 310-S is a flushmount multifunction pressure sensor. It can display up to three parameters alternatively.

A thermostat is a component which senses the temperature of a system so that the system’s temperature is maintained near a desired setpoint.

Kimo’s TST thermostat has a measuring range for the ambient model from 0 to +50°C. For the duct model it would be from -20 to +80°C and for the terminal block model from -100 to +400°C.

Kimo’s COT 212-R measures CO2 from 0 to 20,000 ppm and temperature from 0 to 50°C.

Kimo’s CTV 210-R is a transmitter with hotwire probe measuring air velocity from 0 to 30 m/s and temperature from 0 to +50°C.

Kimo’s TM 210-R can measure up to two temperatures.

Kimo’s TH 210-R measures humidity and temperature including 0 to 100 % RH and -20 to +80°C (ambient model), -20 to +80°C (pc remote probe), and -40 to +180°C (stainless steel remote probe).

Kimo’s CP 210-R measures air velocity, airflow & pressure and is ideal for use in industrial and pharmaceutical applications.

CO2 sensors allow you to measure carbon dioxide.

Kimo’s CO2ST measures CO2.

CO sensors allow you to measure carbon monoxide, which can be a silent killer.

Kimo’s COST is a fixed CO detector.

A hygrostat is an instrument for measuring and controlling humidity.

Kimo’s HST displays alternating temperature and humidity and has a programmable relay with two relative humidity thresholds.

A manostat is a pressure gauge which has a switch inside its casing. At a selected pressure the switch activates an electrical contact and stops the machine on which it is wired.

Kimo’s PST is used to control pressure.

Differential pressure sensors are used tomeasure mass air flow.

Kimo’s CP 114 / 115 measures pressure from -500/+500 mbar to -2,000/+2,000 mbar.

Differential pressure sensors are used to measure mass air flow.

Kimo’s CP 111 / 112 / 113 measures pressure from -100/+100 Pa to -10,000/+10,000 Pa (according to models).

Kimo’s CP 116 measures the atmospheric air pressure with a measuring range of 800 to 1,100 hPa.

Kimo’s TM 50 is a temperature device that measures temperature from 0 to +50°C (ambient model), -20 to +80°C (duct mount model) or -100 to +400°C. (terminal block model).

CO2 sensors allow you to measure carbon dioxide.

Kimo’s CO 112 measures CO2 from 0 to 5,000 ppm.

Kimo’s LR 110 light sensor has a measuring range from 0 to 10,000 lux.

Kimo’s CR 110 measures solar power from 0 to 1,500 w/m2.

Kimo’s HM 110 is a humidity sensor that has a measuring range from 5 to 95% RH.

Kimo’s TM 55 is a temperature device that measures temperature from -20 to +80°C (ambient, air-tight, duct and contact models) or -100 to +400°C (terminal block model).